View previous topic :: View next topic |
Author |
Message |
ptyhon
Joined: 06 Jan 2010 Posts: 15
|
Posted: Thu Jan 07, 2010 1:10 am Post subject: Updating TL2 with L1-Debug-Kernel |
|
|
Hi,
I got problem doing the upgrade of the kernel. This is what i did
- using the TAVRIX live CD i execute the btldr -d /dev/ttyUSB0 kernelfilename
After executing the command it just hang there forever. It just display this message "KERNEL loading procedure has started".
May i know what did i miss out?
Do i need to change the jumper setting on the board to do this? |
|
Back to top |
|
|
pz Guest
|
Posted: Thu Jan 07, 2010 3:48 pm Post subject: |
|
|
Can you describe more how/what are you doing?
Maybe you should try the newer turbo-prog-utils-3.1.6, tavrix is very old.
All you need is to insert TL2 into prog long card edge connector or into prog SIM connector and use "btldr -t [-s if SIM connector used] kernel.bin". That's it, no jumper, switch... |
|
Back to top |
|
|
ptyhon
Joined: 06 Jan 2010 Posts: 15
|
Posted: Fri Jan 08, 2010 2:55 am Post subject: |
|
|
Thanks i think i got it to work.
It said "Copying FLASH image to programmer SRAM finished" and it hang there. I suppose the kernel update is completed. Correct?
Is there any way that i can check the kernel version on the TL2 after flashing?
[quote="pz"]Can you describe more how/what are you doing?
Maybe you should try the newer turbo-prog-utils-3.1.6, tavrix is very old.
All you need is to insert TL2 into prog long card edge connector or into prog SIM connector and use "btldr -t [-s if SIM connector used] kernel.bin". That's it, no jumper, switch...[/quote] |
|
Back to top |
|
|
pz Guest
|
Posted: Fri Jan 08, 2010 9:54 am Post subject: |
|
|
ptyhon wrote: | Thanks i think i got it to work.
It said "Copying FLASH image to programmer SRAM finished" and it hang there. I suppose the kernel update is completed. Correct?
|
This is just the first stage when image is copied to prog sram, the 2nd is from prog sram to TL2. Do you use linux or win? On win sometimes -l is needed (it skips prog sram and goes page by page from pc to TL2).
Is there any way that i can check the kernel version on the TL2 after flashing?
You should see version in Setup->About. |
|
Back to top |
|
|
ptyhon
Joined: 06 Jan 2010 Posts: 15
|
Posted: Fri Jan 08, 2010 5:08 pm Post subject: |
|
|
I guess it is still not working correctly becos i am not able to see the SIM card to ME communication after running dbg.
When i disconnect my TL2 from the Turbo programmer board, can my ME still detect the SIM card? Becos it can't detect mine when i do this
I am using Ubuntu. This is what i did. I just untar the turbo-prog-utils-3.1.6 file and run the bltdr as mentioned.
[quote="pz"][quote="ptyhon"]Thanks i think i got it to work.
It said "Copying FLASH image to programmer SRAM finished" and it hang there. I suppose the kernel update is completed. Correct?
[/quote]
This is just the first stage when image is copied to prog sram, the 2nd is from prog sram to TL2. Do you use linux or win? On win sometimes -l is needed (it skips prog sram and goes page by page from pc to TL2).
Is there any way that i can check the kernel version on the TL2 after flashing?
You should see version in Setup->About.[/quote] |
|
Back to top |
|
|
ptyhon
Joined: 06 Jan 2010 Posts: 15
|
Posted: Mon Jan 11, 2010 5:46 am Post subject: |
|
|
Got it to work under windows.
Thanks for all the replies |
|
Back to top |
|
|
|