| View previous topic :: View next topic |
| Author |
Message |
mike
Guest
|
 Posted: Mon May 21, 2007 5:26 pm Post subject: TURBO MOTION 2 |
 |
|
hello,
I already have a turbo sim toolkit adapter and I have built some applications. Now I want to build an application that measures NMRs, gets NMEA from a GPS module and sends them via SMS.
I found out that I should buy a turbo motion 2. Am I right?
Can I build my own application on turbo motion 2 or only auto alarm runs on it?
how can i order it? I cannot find it on the shop link.... |
|
| Back to top |
|
 |
pz
Guest
|
| Posted: Wed May 23, 2007 6:40 pm Post subject: Re: TURBO MOTION 2 |
|
|
| mike wrote: | hello,
I already have a turbo sim toolkit adapter and I have built some applications. Now I want to build an application that measures NMRs, gets NMEA from a GPS module and sends them via SMS.
I found out that I should buy a turbo motion 2. Am I right?
|
Yes.
| Quote: |
Can I build my own application on turbo motion 2 or only auto alarm runs on it?
how can i order it? I cannot find it on the shop link.... |
We sell it as AA only in our eshop but you can use it for what you describe. So just order AA and you get TM2 (we just haven't been able to update web since we started to provide TM2 more then 1.5 years ago, shame). |
|
| Back to top |
|
|
mike
Guest
|
| Posted: Thu Jun 14, 2007 12:06 pm Post subject: |
|
|
| is it possible to get the auto alarm code in order to adapt it to my needs? |
|
| Back to top |
|
|
pz
Guest
|
|
| Back to top |
|
|
mike
Guest
|
| Posted: Fri Jun 15, 2007 9:28 am Post subject: |
|
|
| thanks pz! |
|
| Back to top |
|
|
pz
Guest
|
|
| Back to top |
|
|
mike
Guest
|
| Posted: Tue Jun 19, 2007 11:23 am Post subject: |
|
|
I just received my turbo motion 2. I connected it to a garmin gps with rs232 connectivity.
Firstly, everything worked perfect and I could read via gps application the gps coordinates. Then, I disconnected gps and I observed that the gps application continued providing the last gps coordinates...
After rebooting my mobile phone the gps coordinates disappeared.
However, since then I connect my garmin gps to turbo motion2 and the gps application does not provide gps coordinates.
What could be the problem?
ps. with my voltometer I measured both garmin's and turbo motion's 2 rs232 ports and they seem to work normally |
|
| Back to top |
|
|
pz
Guest
|
| Posted: Mon Jun 25, 2007 10:35 am Post subject: |
|
|
| mike wrote: | I just received my turbo motion 2. I connected it to a garmin gps with rs232 connectivity.
Firstly, everything worked perfect and I could read via gps application the gps coordinates. Then, I disconnected gps and I observed that the gps application continued providing the last gps coordinates...
|
Yes, this is just cosmetics, it can be cleared. Main motivation was to privde last know coordinates for stolen vehicle.
| Quote: |
After rebooting my mobile phone the gps coordinates disappeared.
However, since then I connect my garmin gps to turbo motion2 and the gps application does not provide gps coordinates.
What could be the problem?
ps. with my voltometer I measured both garmin's and turbo motion's 2 rs232 ports and they seem to work normally |
To tell the truth we have no clue, it's pretty straightforward, should work. You may take a look at the babyloader-1.0.7 - this one reflashes the baby m168 mcu. If you try AA application - do you see the baby version? What about gps in this case? |
|
| Back to top |
|
|
mike
Guest
|
| Posted: Tue Aug 28, 2007 2:53 pm Post subject: |
|
|
how do I reflash the baby m168 mcu?
do I need turbo programmer? |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
