bladox.com

Uday · Joined: 15 Oct 2008 Posts: 14

Hello,

Recently I have purchased TP2 with 2 Blank 2 TSIMs. I have configured gcc and turboutils and successfully compiled and created helloworld.trb.

I have tried all the options of uploading TRB file to TSIM but none of the options are working.

1. TP2: CEMU and prog_apps hang and nothing happens, I tried other commands but nothing happens. When I connect TP through USB cable, it detected USB device (USB-Serial Converter) but no utility works. Is there any method to check if TP is successfully connected and working with PC? I am using Windows XP and using command from bin-win32 folder from the distribution.

2. I tried cableutils on SonyEricson K750 device, e.g. for turbo-info command I got following output
initializing modem
modem initiated
SEND: 01 029100110000810004FF0110
ANS AT+CMGW=9
>
ANS 029100110000810004FF0110 +CMGW: 2 OK
AT POS 2
ANS AT+CMGR=2
+CMGR: 2,,9 029100110000810004FF0110 OK
READ: 0110 OK
ANS AT+CMGD=2
OK
Unknown Error
For turbo-app command with -v option I have received following output
SRC helloworld.trb
SIZE 133
initializing modem
1 -> ATV1 1 <- ATV1
OK
1 -> ATE1 1 <- ATE1
OK
1 -> AT+CPMS="SM","SM" 1 <- AT+CPMS="SM","SM"
+CPMS: 1,20,1,20,87,201
OK
1 -> AT+CMGF=0 1 <- AT+CMGF=0
OK
1 -> AT+CPMS? 1 <- AT+CPMS?
+CPMS: "SM",1,20,"SM",1,20,"ME",87,201
OK
modem initiated
SEND: 02 029100110000810004FF020C00
1 -> AT+CMGW=10 1 <- AT+CMGW=10
>
ANS AT+CMGW=10
>
1 -> 029100110000810004FF020C00
1 <- 029100110000810004FF020C00
+CMGW: 2
OK
ANS 029100110000810004FF020C00 +CMGW: 2 OK
AT POS 2
1 -> AT+CMGR=2 1 <- AT+CMGR=2
+CMGR: 2,,10
029100110000810004FF020C00
OK
ANS AT+CMGR=2
+CMGR: 2,,10 029100110000810004FF020C00 OK
READ: 020C00 OK
1 -> AT+CMGD=2 1 <- AT+CMGD=2
OK
ANS AT+CMGD=2
OK
ERROR: Bad File

How can I resolve these issues?

Secondly, inserting TSIM with regular SIM in phone or TP SIM socket is real pain in the neck. It is very difficult to take out once it is inserted. Are there any technique one can use to easily insert or pull out TSIM + SIM in the phone or TP socket? I fear that if little excessive force is used then either it will break SIM or TSIM.

I have also purchased TL2, how can use it?

Uday

Uday · Joined: 15 Oct 2008 Posts: 14

Hello,

I made some progress after last post. I found out that my serial com port was set to 9, when I started using it, I could communicate with TP. However loose connection is still a problem, I had to press my thumb all the time otherwise it hangs again. Anyway now I have copied helloworld.trb successfully to TSIM. Please see details below...
C:\cygwin\turbo-prog-utils-3.1.6\turbo-prog-utils-3.1.6\bin-win32>sim_dump -dCOM
9 helloworld.trb
SIM mode initialized, sim.trb
SIM_ATR: FF

FILE: MF 3F00
SELECT 3F00
File Does Not Exist

C:\cygwin\turbo-prog-utils-3.1.6\turbo-prog-utils-3.1.6\bin-win32>cemu --app hel
loworld.trb -dCOM9
SIM mode initialized, sim.trb
SIM_ATR: 3B 1B 94 80 69 01 01 12 11 00 80 00 00 00

Uploaded 128/133 bytes
Uploaded 133/133 bytes

OK. No Error

How do I now test the application, after I insert it into phone (SIM + TSIM) phone just boots to normal and I don't see helloworld app. How to see that it is working?

Thanks & regards....

Uday

pz · Guest

Uday · Joined: 15 Oct 2008 Posts: 14

Hi,

Thanks for the help. cemu tells me that it has loaded helloworld.trb successfully however prog_apps does not show it.. what is the problem?
Please see screen dump below...
C:\cygwin\turbo-prog-utils-3.1.6\turbo-prog-utils-3.1.6\bin-win32>cemu --app hel
loworld.trb -dCOM9
SIM mode initialized, sim.trb
SIM_ATR: 3B 1B 94 80 69 01 01 12 11 00 80 00 00 00

Uploaded 128/133 bytes
Uploaded 133/133 bytes

OK. No Error

C:\cygwin\turbo-prog-utils-3.1.6\turbo-prog-utils-3.1.6\bin-win32>prog_apps -d C
OM9
Programmer kernel version: 3.1.1
Programmer application list:
0: avrprog.trb 3.1.0
1: brum.trb 3.1.0
2: df.trb 3.1.0
3: sim.trb 3.1.9
4: turboadapter.trb 3.1.11

C:\cygwin\turbo-prog-utils-3.1.6\turbo-prog-utils-3.1.6\bin-win32>

pz · Guest

prog_apps lists applications in TP2, not TL2/TSIM - you cannot list apps in turbo devices

Uday · Joined: 15 Oct 2008 Posts: 14

Ok, I am still not getting as to where should I check whether SIM/TSIM has application which was successfully copied using cemu?
Where is my helloworld.trb? How do I test it or check if it is working or not? Can you please help?

Uday

Uday · Joined: 15 Oct 2008 Posts: 14

Please let me know... I tried calling your number given on Invoice but it goes to Fax. May be we can sort it out quickly on the phone?

Uday

pz · Guest

Uday · Joined: 15 Oct 2008 Posts: 14

After cemu --app helloworld.trb, it says no error but I don't see TurboSTK menu on the phone.

Uday

Uday · Joined: 15 Oct 2008 Posts: 14

Please respond

cporter · Guest

Hi Uday,

The Turbo option should 'replace' the old operator menu option (which generally provides listings of Value Added Services). What mobile phone are you using?

Chris

Uday · Joined: 15 Oct 2008 Posts: 14

Hi,

I have used SonyEricson K750 and Old Nokia Phone. I have used Idea Cellular in India as network provider.

Thanks for your help.

Regards...

Uday

cporter · Guest

For your K750 you will probably find the Turbo option (and your applications) within the Operator Services menu option.

What model is your Nokia?

Chris[/b]

Uday · Joined: 15 Oct 2008 Posts: 14

I have posted as much detail information as possible but I don't see good response. I can understand that Bladox team was in France but why not after the event is over? May I request Bladox staff to go thru all the posting and help me out?

All our investment in Bladox products is dead currently... Is there phone support? Only support on forum is too slow. I have invested 380+ Euros on these product and I expect good support otherwise I don't option to return the product and seek alternate solution

Regards...

Uday

Uday · Joined: 15 Oct 2008 Posts: 14

Unfortunately I don't see Turbo menu anywhere.. I checked all possible options.

Uday